Filter Products
Cam
Valves
Model
Description
Brands
Low Stock
Always replace the complete clutch assembly.
Check against the original units before fitting.
Make sure the friction plate is fitted the correct way round.
Never allow the gearbox to hang on clutch components.
This Einbach Clutch Kit (Conversion Kit) fits the following vehicles
- Passat 2.0 TDI 110 B6 (2005-2011) 10/08-03/11
| Description | Clutch Kit (SMF Conv.) |
|---|---|
| OE System | CBDC |
| Fitment | 110 |
| Size mm | with guide sleeve;with clutch pressure plate, with clutch plate, with flywheel, with releaser;Tightening Torque: 160 Nm |
| Country | Friction Lining Outer Dia.:228 |
| Trade No | 28 |
| Axle Info | Conv. from dual-mass flywheel to single-mass flywheel;For veh. without start-stop function |
| PR/RP No | Manual Transmission |
Always replace the complete clutch assembly.
Check against the original units before fitting.
Make sure the friction plate is fitted the correct way round.
Never allow the gearbox to hang on clutch components.
£279.92
£233.27
new
LUK Dual Mass Flywheel
415074009
In Stock
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
This LUK Dual Mass Flywheel fits the following vehicles
- Passat 2.0 TDI 140 B6 (2005-2011) 06/05-03/11
- Passat 2.0 TDI 140 B6 (2005-2011) 11/05-03/11
- Passat 2.0 TDI 140 B7 (2010-2015) DSG 11/10-07/15
- Passat 2.0 TDI 140 DPF B6 (2005-2011) 08/06-03/11
- Passat 2.0 TDI 170 B6 (2005-2011) 10/05-03/11
- Passat 2.0 TDI 170 B6 (2005-2011) 11/05-03/11
- Passat CC 2.0 TDI 140 (2008-2012) DSG 05/08-05/12
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | BKP, CBAB, BMA, CBAA |
| BHP | 136 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 19 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | with pilot bearing; No of Mounting Bores: 6 |
| Transmission Note | 6-Speed dual-clutch transmission |
| Vehicle Detail | for wet clutch |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | BKP, BMA, CBAA, CBAB |
| BHP | 136 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 19 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | with pilot bearing; No of Mounting Bores: 6 |
| Transmission Note | 6-Speed dual-clutch transmission |
| Vehicle Detail | for wet clutch |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | CBAC |
| BHP | 138 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 19 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | with pilot bearing; No of Mounting Bores: 6 |
| Transmission Note | 6-Speed dual-clutch transmission |
| Vehicle Detail | for wet clutch |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | BMP |
| BHP | 138 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 19 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | with pilot bearing; No of Mounting Bores: 6 |
| Transmission Note | 6-Speed dual-clutch transmission |
| Vehicle Detail | for wet clutch |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | BMR |
| BHP | 168 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 19 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | with pilot bearing; No of Mounting Bores: 6 |
| Transmission Note | 6-Speed dual-clutch transmission |
| Vehicle Detail | for wet clutch |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | BMR |
| BHP | 168 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 19 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | with pilot bearing; No of Mounting Bores: 6 |
| Transmission Note | 6-Speed dual-clutch transmission |
| Vehicle Detail | for wet clutch |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | CBAA, CBAB |
| BHP | 136 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 19 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | with pilot bearing; No of Mounting Bores: 6 |
| Transmission Note | 6-Speed dual-clutch transmission |
| Vehicle Detail | for wet clutch |
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
£272.51
£227.09
new
In Stock
Always replace the complete clutch assembly.
Check against the original units before fitting.
Make sure the friction plate is fitted the correct way round.
Never allow the gearbox to hang on clutch components.
This Einbach Clutch Kit (Conversion Kit) fits the following vehicles
- Passat 2.0 TDI 140 DPF B6 (2005-2011) 08/06-03/11
| Description | Clutch Kit (SMF Conv.) |
|---|---|
| OE System | BMP |
| Fitment | 138 |
| Size mm | with clutch pressure plate, with clutch plate, with flywheel, without central slave cylinder;Tightening Torque: 110 Nm |
| Country | Friction Lining Outer Dia.:240 |
| Trade No | 23 |
| Axle Info | Conv. from dual-mass flywheel to single-mass flywheel |
| PR/RP No | Manual Transmission |
| Engine Code | BMP |
Always replace the complete clutch assembly.
Check against the original units before fitting.
Make sure the friction plate is fitted the correct way round.
Never allow the gearbox to hang on clutch components.
£338.77
£282.31
new
LUK Dual Mass Flywheel
415074409
In Stock
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
This LUK Dual Mass Flywheel fits the following vehicles
- Passat 2.0 TDI 140 B7 (2010-2015) DSG 11/10-07/15
- Passat 2.0 TDI 170 B6 (2005-2011) 06/10-
- Passat 2.0 TDI 170 B7 (2010-2015) DSG 11/10-07/15
- Passat CC 2.0 TDI 140 (2008-2012) DSG 05/08-05/12
- Passat CC 2.0 TDI 170 (2008-2012) DSG 06/10-
- Passat CC 2.0 TDI 170 (2008-2012) DSG 06/10-05/12
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | CFFB |
| BHP | 138 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 19 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | with pilot bearing; No of Mounting Bores: 6 |
| Transmission Note | 6-Speed dual-clutch transmission |
| Vehicle Detail | for wet clutch |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | CBBB |
| BHP | 168 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 19 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | with pilot bearing; No of Mounting Bores: 6 |
| Transmission Note | 6-Speed dual-clutch transmission |
| Vehicle Detail | for wet clutch |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | CFGB |
| BHP | 168 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 19 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | with pilot bearing; No of Mounting Bores: 6 |
| Transmission Note | 6-Speed dual-clutch transmission |
| Vehicle Detail | for wet clutch |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | CFFB |
| BHP | 136 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 19 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | with pilot bearing; No of Mounting Bores: 6 |
| Transmission Note | 6-Speed dual-clutch transmission |
| Vehicle Detail | for wet clutch |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | CBBB |
| BHP | 168 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 19 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | with pilot bearing; No of Mounting Bores: 6 |
| Transmission Note | 6-Speed dual-clutch transmission |
| Vehicle Detail | for wet clutch |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | CFGB |
| BHP | 168 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 19 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | with pilot bearing; No of Mounting Bores: 6 |
| Transmission Note | 6-Speed dual-clutch transmission |
| Vehicle Detail | for wet clutch |
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
£372.73
£310.61
new
LUK Clutch Kit (+CSC)
624355333
In Stock
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
This LUK Clutch Kit (+CSC) fits the following vehicles
- Passat 2.0 TDI 140 B7 (2010-2015) 06/11-
- Passat 2.0 TDI 170 B7 (2010-2015) 06/11-
| Description | Clutch Kit (+CSC) |
|---|---|
| Engine Code | CFFB |
| BHP | 138 |
| Brand Type | LuK RepSet Pro |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment; with concentric slave cylinder |
| OE System | for flywheel manufacturer: LuK |
| Size mm | Dia: 240 |
| Description | Clutch Kit (+CSC) |
|---|---|
| Engine Code | CFGB |
| BHP | 168 |
| Brand Type | LuK RepSet Pro |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment; with concentric slave cylinder |
| Size mm | Dia: 240 |
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
£223.20
£186.00
new
LUK Clutch Kit
624355309
In Stock
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
This LUK Clutch Kit fits the following vehicles
- Passat 2.0 TDI 140 B7 (2010-2015) 06/11-
- Passat 2.0 TDI 170 B7 (2010-2015) 11/10-07/15
- Passat CC 2.0 TDI 140 (2008-2012) 06/11-
- Passat CC 2.0 TDI 170 (2008-2012) 06/11-
| Description | Clutch Kit |
|---|---|
| Engine Code | CFFB |
| BHP | 138 |
| Brand Type | LuK SAC |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment |
| OE System | for flywheel manufacturer: LuK |
| Size mm | Dia: 240 |
| Description | Clutch Kit |
|---|---|
| Engine Code | CFGB |
| BHP | 168 |
| Brand Type | LuK SAC |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment |
| Size mm | Dia: 240 |
| Description | Clutch Kit |
|---|---|
| Engine Code | CFFB, CBAB |
| BHP | 136 |
| Brand Type | LuK SAC |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment |
| OE System | for flywheel manufacturer: LuK |
| Size mm | Dia: 240 |
| Description | Clutch Kit |
|---|---|
| Engine Code | CBBB, CFGB |
| BHP | 168 |
| Brand Type | LuK SAC |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment |
| Size mm | Dia: 240 |
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
£202.92
£169.10
new
LUK Clutch Kit
624323009
Low Stock
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
This LUK Clutch Kit fits the following vehicles
- Passat 2.0 TDI 140 B6 (2005-2011) 06/05-03/11
- Passat 2.0 TDI 140 B6 (2005-2011) 11/05-03/11
- Passat 2.0 TDI 140 B7 (2010-2015) 11/10-07/15
- Passat 2.0 TDI 140 DPF B6 (2005-2011) 08/06-03/11
| Description | Clutch Kit |
|---|---|
| Engine Code | BKP, CBAB, BMA |
| BHP | 136 |
| Brand Type | LuK SAC |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment |
| OE System | for flywheel manufacturer: Sachs |
| Size mm | Dia: 240 |
| Description | Clutch Kit |
|---|---|
| Engine Code | BKP, BMA, CBAB |
| BHP | 136 |
| Brand Type | LuK SAC |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment |
| OE System | for flywheel manufacturer: Sachs |
| Size mm | Dia: 240 |
| Description | Clutch Kit |
|---|---|
| Engine Code | CBAC |
| BHP | 138 |
| Brand Type | LuK SAC |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment |
| OE System | for flywheel manufacturer: Sachs |
| Size mm | Dia: 240 |
| Description | Clutch Kit |
|---|---|
| Engine Code | BMP |
| BHP | 138 |
| Brand Type | LuK SAC |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment |
| OE System | for flywheel manufacturer: Sachs |
| Size mm | Dia: 240 |
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
£313.94
£261.62
new
LUK Clutch Kit (+CSC)
624318034
In Stock
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
This LUK Clutch Kit (+CSC) fits the following vehicles
- Passat 2.0 TDI 140 B6 (2005-2011) 06/05-03/11
- Passat 2.0 TDI 140 B6 (2005-2011) 11/05-03/11
- Passat 2.0 TDI 140 B7 (2010-2015) 11/10-05/11
- Passat 2.0 TDI 140 B7 (2010-2015) 11/10-07/15
- Passat 2.0 TDI 140 DPF B6 (2005-2011) 08/06-03/11
- Passat 2.0 TDI 170 B6 (2005-2011) 10/05-03/11
- Passat 2.0 TDI 170 B6 (2005-2011) 11/05-03/11
- Passat CC 2.0 TDI 140 (2008-2012) 05/08-05/11
- Passat CC 2.0 TDI 140 (2008-2012) 05/08-05/12
- Passat CC 2.0 TDI 170 (2008-2012) 06/10-05/11
- Passat CC 2.0 TDI 170 (2008-2012) 09/08-05/11
| Description | Clutch Kit (+CSC) |
|---|---|
| Engine Code | BKP, CBAB, BMA, CBAA |
| BHP | 136 |
| Brand Type | LuK RepSet Pro |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment; with concentric slave cylinder |
| OE System | for flywheel manufacturer: LuK |
| Size mm | Dia: 240 |
| Description | Clutch Kit (+CSC) |
|---|---|
| Engine Code | BKP, BMA, CBAA, CBAB |
| BHP | 136 |
| Brand Type | LuK RepSet Pro |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment; with concentric slave cylinder |
| OE System | for flywheel manufacturer: LuK |
| Size mm | Dia: 240 |
| Description | Clutch Kit (+CSC) |
|---|---|
| Engine Code | CFFB |
| BHP | 138 |
| Brand Type | LuK RepSet Pro |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment; with concentric slave cylinder |
| OE System | for flywheel manufacturer: LuK |
| Size mm | Dia: 240 |
| Description | Clutch Kit (+CSC) |
|---|---|
| Engine Code | CBAC |
| BHP | 138 |
| Brand Type | LuK RepSet Pro |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment; with concentric slave cylinder |
| OE System | for flywheel manufacturer: LuK |
| Size mm | Dia: 240 |
| Description | Clutch Kit (+CSC) |
|---|---|
| Engine Code | BMP |
| BHP | 138 |
| Brand Type | LuK RepSet Pro |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment; with concentric slave cylinder |
| OE System | for flywheel manufacturer: LuK |
| Size mm | Dia: 240 |
| Description | Clutch Kit (+CSC) |
|---|---|
| Engine Code | BMR, CBBB |
| BHP | 168 |
| Brand Type | LuK RepSet Pro |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment; with concentric slave cylinder |
| OE System | for flywheel manufacturer: LuK |
| Size mm | Dia: 240 |
| Description | Clutch Kit (+CSC) |
|---|---|
| Engine Code | BMR, CBBB |
| BHP | 168 |
| Brand Type | LuK RepSet Pro |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment; with concentric slave cylinder |
| OE System | for flywheel manufacturer: LuK |
| Size mm | Dia: 240 |
| Description | Clutch Kit (+CSC) |
|---|---|
| Engine Code | CFFB, CBAB |
| BHP | 136 |
| Brand Type | LuK RepSet Pro |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment; with concentric slave cylinder |
| OE System | for flywheel manufacturer: LuK |
| Size mm | Dia: 240 |
| Description | Clutch Kit (+CSC) |
|---|---|
| Engine Code | CBAA |
| BHP | 136 |
| Brand Type | LuK RepSet Pro |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment; with concentric slave cylinder |
| OE System | for flywheel manufacturer: LuK |
| Size mm | Dia: 240 |
| Description | Clutch Kit (+CSC) |
|---|---|
| Engine Code | CFGB |
| BHP | 168 |
| Brand Type | LuK RepSet Pro |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment; with concentric slave cylinder |
| Size mm | Dia: 240 |
| Description | Clutch Kit (+CSC) |
|---|---|
| Engine Code | CBBB |
| BHP | 168 |
| Brand Type | LuK RepSet Pro |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment; with concentric slave cylinder |
| Size mm | Dia: 240 |
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
£168.04
£140.03
new
LUK Clutch Kit (+CSC+DMF)
600001700
In Stock
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
This LUK Clutch Kit (+CSC+DMF) fits the following vehicles
- Passat 2.0 TDI 140 B6 (2005-2011) 06/05-03/11
- Passat 2.0 TDI 140 B6 (2005-2011) 11/05-03/11
- Passat 2.0 TDI 140 B7 (2010-2015) 11/10-05/11
- Passat 2.0 TDI 140 B7 (2010-2015) 11/10-07/15
- Passat 2.0 TDI 140 DPF B6 (2005-2011) 08/06-03/11
- Passat 2.0 TDI 170 B6 (2005-2011) 10/05-03/11
- Passat 2.0 TDI 170 B6 (2005-2011) 11/05-03/11
- Passat CC 2.0 TDI 140 (2008-2012) 05/08-05/11
- Passat CC 2.0 TDI 140 (2008-2012) 05/08-05/12
- Passat CC 2.0 TDI 140 (2008-2012) 11/09-05/11
- Passat CC 2.0 TDI 170 (2008-2012) 06/10-05/11
- Passat CC 2.0 TDI 170 (2008-2012) 09/08-05/11
| Description | Clutch Kit (+CSC+DMF) |
|---|---|
| Engine Code | BKP, CBAB, BMA, CBAA |
| BHP | 136 |
| Brand Type | LuK RepSet DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | with Clutch Disc; Requires special tools for mounting; with screw set; Dual-mass flywheel with friction control plate; with flywheel |
| Note 2 | with clutch pressure plate; with automatic adjustment; with concentric slave cylinder; without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Chassis No | -> 9#200000, A#000001 -> |
| Vehicle Detail | Without start-stop function |
| Description | Clutch Kit (+CSC+DMF) |
|---|---|
| Engine Code | BKP, BMA, CBAA, CBAB |
| BHP | 136 |
| Brand Type | LuK RepSet DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | with Clutch Disc; Requires special tools for mounting; with screw set; Dual-mass flywheel with friction control plate; with flywheel |
| Note 2 | with clutch pressure plate; with automatic adjustment; with concentric slave cylinder; without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Chassis No | -> 9#200000, A#000001 -> |
| Vehicle Detail | Without start-stop function |
| Description | Clutch Kit (+CSC+DMF) |
|---|---|
| Engine Code | CFFB |
| BHP | 138 |
| Brand Type | LuK RepSet DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | with Clutch Disc; Requires special tools for mounting; with screw set; Dual-mass flywheel with friction control plate; with flywheel |
| Note 2 | with clutch pressure plate; with automatic adjustment; with concentric slave cylinder; without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Vehicle Detail | Without start-stop function |
| Description | Clutch Kit (+CSC+DMF) |
|---|---|
| Engine Code | CBAC |
| BHP | 138 |
| Brand Type | LuK RepSet DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | with Clutch Disc; Requires special tools for mounting; with screw set; Dual-mass flywheel with friction control plate; with flywheel |
| Note 2 | with clutch pressure plate; with automatic adjustment; with concentric slave cylinder; without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Description | Clutch Kit (+CSC+DMF) |
|---|---|
| Engine Code | BMP |
| BHP | 138 |
| Brand Type | LuK RepSet DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | with Clutch Disc; Requires special tools for mounting; with screw set; Dual-mass flywheel with friction control plate; with flywheel |
| Note 2 | with clutch pressure plate; with automatic adjustment; with concentric slave cylinder; without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Description | Clutch Kit (+CSC+DMF) |
|---|---|
| Engine Code | BMR, CBBB |
| BHP | 168 |
| Brand Type | LuK RepSet DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | with Clutch Disc; Requires special tools for mounting; with screw set; Dual-mass flywheel with friction control plate; with flywheel |
| Note 2 | with clutch pressure plate; with automatic adjustment; with concentric slave cylinder; without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Chassis No | -> 9#200000, A#000001 -> |
| Vehicle Detail | Without start-stop function |
| Description | Clutch Kit (+CSC+DMF) |
|---|---|
| Engine Code | BMR, CBBB |
| BHP | 168 |
| Brand Type | LuK RepSet DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | with Clutch Disc; Requires special tools for mounting; with screw set; Dual-mass flywheel with friction control plate; with flywheel |
| Note 2 | with clutch pressure plate; with automatic adjustment; with concentric slave cylinder; without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Chassis No | A#000001 ->, -> 9#200000 |
| Vehicle Detail | Without start-stop function |
| Description | Clutch Kit (+CSC+DMF) |
|---|---|
| Engine Code | CFFB |
| BHP | 136 |
| Brand Type | LuK RepSet DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | with Clutch Disc; Requires special tools for mounting; with screw set; Dual-mass flywheel with friction control plate; with flywheel |
| Note 2 | with clutch pressure plate; with automatic adjustment; with concentric slave cylinder; without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Vehicle Detail | Without start-stop function |
| Description | Clutch Kit (+CSC+DMF) |
|---|---|
| Engine Code | CBAA |
| BHP | 136 |
| Brand Type | LuK RepSet DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | with Clutch Disc; Requires special tools for mounting; with screw set; Dual-mass flywheel with friction control plate; with flywheel |
| Note 2 | with clutch pressure plate; with automatic adjustment; with concentric slave cylinder; without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Description | Clutch Kit (+CSC+DMF) |
|---|---|
| Engine Code | CBAB |
| BHP | 136 |
| Brand Type | LuK RepSet DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | with Clutch Disc; Requires special tools for mounting; with screw set; Dual-mass flywheel with friction control plate; with flywheel |
| Note 2 | with clutch pressure plate; with automatic adjustment; with concentric slave cylinder; without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Vehicle Detail | Without start-stop function |
| Description | Clutch Kit (+CSC+DMF) |
|---|---|
| Engine Code | CFGB |
| BHP | 168 |
| Brand Type | LuK RepSet DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | with Clutch Disc; Requires special tools for mounting; with screw set; Dual-mass flywheel with friction control plate; with flywheel |
| Note 2 | with clutch pressure plate; with automatic adjustment; with concentric slave cylinder; without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Vehicle Detail | Without start-stop function |
| Description | Clutch Kit (+CSC+DMF) |
|---|---|
| Engine Code | CBBB |
| BHP | 168 |
| Brand Type | LuK RepSet DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | with Clutch Disc; Requires special tools for mounting; with screw set; Dual-mass flywheel with friction control plate; with flywheel |
| Note 2 | with clutch pressure plate; with automatic adjustment; with concentric slave cylinder; without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
£358.67
£298.89
new
LUK Dual Mass Flywheel
415058310
In Stock
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
This LUK Dual Mass Flywheel fits the following vehicles
- Passat 2.0 TDI 140 B6 (2005-2011) 06/05-03/11
- Passat 2.0 TDI 140 B6 (2005-2011) 11/05-03/11
- Passat 2.0 TDI 170 B7 (2010-2015) 11/10-07/15
- Passat CC 2.0 TDI 140 (2008-2012) 05/08-05/11
- Passat CC 2.0 TDI 140 (2008-2012) 06/11-
- Passat CC 2.0 TDI 140 (2008-2012) 11/09-05/11
- Passat CC 2.0 TDI 170 (2008-2012) 06/10-05/12
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | CBAB |
| BHP | 136 |
| Associated Product | only in connection with: 624 3180 09/34 |
| Brand Type | LuK DMF |
| Chassis No | A#000001 -> |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Transmission Note | Manual Transmission |
| Vehicle Detail | With start-stop function |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | CBAB |
| BHP | 136 |
| Associated Product | only in connection with: 624 3180 09/34 |
| Brand Type | LuK DMF |
| Chassis No | A#000001 -> |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Transmission Note | Manual Transmission |
| Vehicle Detail | With start-stop function |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | CFGB |
| BHP | 168 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Transmission Note | Manual Transmission |
| Vehicle Detail | With start-stop function |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | CFFB |
| BHP | 136 |
| Associated Product | only in connection with: 624 3180 09/34 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Transmission Note | Manual Transmission |
| Vehicle Detail | With start-stop function |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | CFFB, CBAB |
| BHP | 136 |
| Associated Product | only in connection with: 624 3553 09/34 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Transmission Note | Manual Transmission |
| Vehicle Detail | With start-stop function |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | CBAB |
| BHP | 136 |
| Associated Product | only in connection with: 624 3180 09/34 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Transmission Note | Manual Transmission |
| Vehicle Detail | With start-stop function |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | CFGB |
| BHP | 168 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Transmission Note | Manual Transmission |
| Vehicle Detail | With start-stop function |
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
£295.82
£246.52
new
LUK Dual Mass Flywheel
415043110
In Stock
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
This LUK Dual Mass Flywheel fits the following vehicles
- Passat 2.0 TDI 140 B6 (2005-2011) 06/05-03/11
- Passat 2.0 TDI 140 B6 (2005-2011) 11/05-03/11
- Passat 2.0 TDI 140 B7 (2010-2015) 11/10-07/15
- Passat 2.0 TDI 140 DPF B6 (2005-2011) 08/06-03/11
- Passat 2.0 TDI 170 B6 (2005-2011) 10/05-03/11
- Passat 2.0 TDI 170 B6 (2005-2011) 11/05-03/11
- Passat 2.0 TDI 170 B7 (2010-2015) 11/10-07/15
- Passat CC 2.0 TDI 140 (2008-2012) 05/08-05/11
- Passat CC 2.0 TDI 140 (2008-2012) 05/08-05/12
- Passat CC 2.0 TDI 140 (2008-2012) 06/11-
- Passat CC 2.0 TDI 140 (2008-2012) 11/09-05/11
- Passat CC 2.0 TDI 170 (2008-2012) 06/10-05/12
- Passat CC 2.0 TDI 170 (2008-2012) 09/08-05/12
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | BKP, CBAB, BMA, CBAA |
| BHP | 136 |
| Associated Product | only in connection with: 624 3180 09/34 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Transmission Note | Manual Transmission |
| Chassis No | A#000001 ->, -> 9#200000 |
| Vehicle Detail | Without start-stop function |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | BKP, BMA, CBAA, CBAB |
| BHP | 136 |
| Associated Product | only in connection with: 624 3180 09/34 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Transmission Note | Manual Transmission |
| Chassis No | -> 9#200000, A#000001 -> |
| Vehicle Detail | Without start-stop function |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | CBAC |
| BHP | 138 |
| Associated Product | only in connection with: 624 3180 09/34 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Transmission Note | Manual Transmission |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | BMP |
| BHP | 138 |
| Associated Product | only in connection with: 624 3180 09/34 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Transmission Note | Manual Transmission |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | BMR, CBBB |
| BHP | 168 |
| Associated Product | only in connection with: 624 3180 09/34 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Transmission Note | Manual Transmission |
| Chassis No | A#000001 ->, -> 9#200000 |
| Vehicle Detail | Without start-stop function |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | BMR, CBBB |
| BHP | 168 |
| Associated Product | only in connection with: 624 3180 09/34 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Transmission Note | Manual Transmission |
| Chassis No | A#000001 ->, -> 9#200000 |
| Vehicle Detail | Without start-stop function |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | CFGB |
| BHP | 168 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Transmission Note | Manual Transmission |
| Vehicle Detail | Without start-stop function |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | CFFB |
| BHP | 136 |
| Associated Product | only in connection with: 624 3180 09/34 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Transmission Note | Manual Transmission |
| Vehicle Detail | Without start-stop function |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | CBAA |
| BHP | 136 |
| Associated Product | only in connection with: 624 3180 09/34 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Transmission Note | Manual Transmission |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | CFFB, CBAB |
| BHP | 136 |
| Associated Product | only in connection with: 624 3553 09/34 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Transmission Note | Manual Transmission |
| Vehicle Detail | Without start-stop function |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | CBAB |
| BHP | 136 |
| Associated Product | only in connection with: 624 3180 09/34 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Transmission Note | Manual Transmission |
| Vehicle Detail | Without start-stop function |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | CFGB |
| BHP | 168 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Transmission Note | Manual Transmission |
| Vehicle Detail | Without start-stop function |
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | CBBB |
| BHP | 168 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Transmission Note | Manual Transmission |
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
£266.17
£221.81
new
Einbach Clutch Kit
2E60194
Low Stock
Always replace the complete clutch assembly.
Check against the original units before fitting.
Make sure the friction plate is fitted the correct way round.
Never allow the gearbox to hang on clutch components.
This Einbach Clutch Kit fits the following vehicles
- Passat 2.0 TDI 110 B6 (2005-2011) 12/09-03/11
| Description | Clutch Kit |
|---|---|
| OE System | CBDC |
| Fitment | 110 |
| Part Detail | For flywheel manufacturerSachs |
| Size mm | With clutch pressure plate, With clutch plate,with releaser |
| Country | Friction Lining Outer Dia.:228 |
| Trade No | 28 |
| Axle Info | For Eng. with dual-mass flywheel |
| PR/RP No | Manual Transmission |
Always replace the complete clutch assembly.
Check against the original units before fitting.
Make sure the friction plate is fitted the correct way round.
Never allow the gearbox to hang on clutch components.
£157.80
£131.50
new
LUK Clutch Kit
623309400
In Stock
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
This LUK Clutch Kit fits the following vehicles
- Passat 2.0 TDI 110 B6 (2005-2011) 10/08-03/11
| Description | Clutch Kit |
|---|---|
| Engine Code | CBDC |
| BHP | 110 |
| Brand Type | LuK SAC |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; with Release Bearing; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting; with screw set |
| Note 2 | with clutch pressure plate; with automatic adjustment |
| OE System | for flywheel manufacturer: LuK |
| Size mm | Dia: 230 |
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
£164.86
£137.38
new
LUK Clutch Kit (+DMF)
600019900
In Stock
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
This LUK Clutch Kit (+DMF) fits the following vehicles
- Passat 2.0 TDI 110 B6 (2005-2011) 10/08-03/11
| Description | Clutch Kit (+DMF) |
|---|---|
| Engine Code | CBDC |
| BHP | 110 |
| Brand Type | LuK RepSet DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | with Clutch Disc; with Release Bearing; Requires special tools for mounting; with screw set; Dual-mass flywheel without friction control plate; with flywheel |
| Note 2 | with clutch pressure plate; with automatic adjustment; without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Vehicle Detail | Without start-stop function |
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
£351.43
£292.86
new
LUK Clutch Release Bearing
500044010
In Stock
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
This LUK Clutch Release Bearing fits the following vehicles
- Passat 2.0 TDI 110 B6 (2005-2011) 10/08-03/11
| Description | Release Bearing, CRS |
|---|---|
| Engine Code | CBDC |
| BHP | 110 |
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
£15.71
£13.09
new
LUK Dual Mass Flywheel
415057410
In Stock
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
This LUK Dual Mass Flywheel fits the following vehicles
- Passat 2.0 TDI 110 B6 (2005-2011) 10/08-03/11
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | CBDC |
| BHP | 110 |
| Associated Product | only in connection with: 623 3094 00/21 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 7 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Transmission Note | Manual Transmission |
| Vehicle Detail | Without start-stop function |
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
£345.91
£288.26
new
LUK Dual Mass Flywheel
415055710
In Stock
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
This LUK Dual Mass Flywheel fits the following vehicles
- Passat 2.0 TDI 110 B6 (2005-2011) 10/08-03/11
| Description | Dual Mass Flywheel |
|---|---|
| Engine Code | CBDC |
| BHP | 110 |
| Associated Product | only in connection with: 623 3094 00/21 |
| Brand Type | LuK DMF |
| Engine Detail | for engines with dual-mass flywheel |
| Max Clearance Angle | Degrees: 18; Teeth: 6 |
| Note | Dual-mass flywheel without friction control plate; without screw set |
| Note 2 | without pilot bearing; No of Mounting Bores: 6 |
| Size mm | Max Sideplay: 2.9 |
| Transmission Note | Manual Transmission |
| Vehicle Detail | With start-stop function |
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
£391.97
£326.64
new
LUK Flywheel Bolt Kit
411013310
In Stock
Replacement mounting bolts for flywheels are recommended to be used when changing flywheels
This LUK Flywheel Bolt Kit fits the following vehicles
- Passat 2.0 TDI 110 B6 (2005-2011) 10/08-03/11
- Passat 2.0 TDI 140 B6 (2005-2011) 06/05-03/11
- Passat 2.0 TDI 140 B6 (2005-2011) 11/05-03/11
- Passat 2.0 TDI 140 B7 (2010-2015) 11/10-07/15
- Passat 2.0 TDI 140 DPF B6 (2005-2011) 08/06-03/11
- Passat 2.0 TDI 170 B6 (2005-2011) 10/05-03/11
- Passat 2.0 TDI 170 B6 (2005-2011) 11/05-03/11
- Passat 2.0 TDI 170 B7 (2010-2015) 11/10-07/15
- Passat CC 2.0 TDI 140 (2008-2012) 05/08-05/12
- Passat CC 2.0 TDI 170 (2008-2012) 06/10-05/12
- Passat CC 2.0 TDI 170 (2008-2012) 09/08-05/12
| Description | Screw Set, flywheel |
|---|---|
| Engine Code | CBDC |
| BHP | 110 |
| Note 2 | No of screws: 6 |
| Description | Screw Set, flywheel |
|---|---|
| Engine Code | BKP, CBAB, BMA, CBAA |
| BHP | 136 |
| Note 2 | No of screws: 6 |
| Transmission Note | Manual Transmission |
| Vehicle Detail | With direct shift gear box |
| Description | Screw Set, flywheel |
|---|---|
| Engine Code | BKP, BMA, CBAA, CBAB |
| BHP | 136 |
| Note 2 | No of screws: 6 |
| Transmission Note | Manual Transmission |
| Vehicle Detail | With direct shift gear box |
| Description | Screw Set, flywheel |
|---|---|
| Engine Code | CBAC, CFFB |
| BHP | 138 |
| Note 2 | No of screws: 6 |
| Transmission Note | Manual Transmission |
| Vehicle Detail | With direct shift gear box |
| Description | Screw Set, flywheel |
|---|---|
| Engine Code | BMP |
| BHP | 138 |
| Note 2 | No of screws: 6 |
| Transmission Note | Manual Transmission |
| Vehicle Detail | With direct shift gear box |
| Description | Screw Set, flywheel |
|---|---|
| Engine Code | BMR, CBBB |
| BHP | 168 |
| Note 2 | No of screws: 6 |
| Transmission Note | Manual Transmission |
| Vehicle Detail | With direct shift gear box |
| Description | Screw Set, flywheel |
|---|---|
| Engine Code | BMR, CBBB |
| BHP | 168 |
| Note 2 | No of screws: 6 |
| Transmission Note | Manual Transmission |
| Vehicle Detail | With direct shift gear box |
| Description | Screw Set, flywheel |
|---|---|
| Engine Code | CFGB |
| BHP | 168 |
| Note 2 | No of screws: 6 |
| Transmission Note | Manual Transmission |
| Vehicle Detail | With direct shift gear box |
| Description | Screw Set, flywheel |
|---|---|
| Engine Code | CBAA, CFFB, CBAB |
| BHP | 136 |
| Note 2 | No of screws: 6 |
| Transmission Note | Manual Transmission |
| Vehicle Detail | With direct shift gear box |
| Description | Screw Set, flywheel |
|---|---|
| Engine Code | CFGB |
| BHP | 168 |
| Note 2 | No of screws: 6 |
| Transmission Note | Manual Transmission |
| Vehicle Detail | With direct shift gear box |
| Description | Screw Set, flywheel |
|---|---|
| Engine Code | CBBB |
| BHP | 168 |
| Note 2 | No of screws: 6 |
| Transmission Note | Manual Transmission |
| Vehicle Detail | With direct shift gear box |
Replacement mounting bolts for flywheels are recommended to be used when changing flywheels
£7.01
£5.84
new
Einbach Clutch Kit
2E60070
In Stock
Always replace the complete clutch assembly.
Check against the original units before fitting.
Make sure the friction plate is fitted the correct way round.
Never allow the gearbox to hang on clutch components.
This Einbach Clutch Kit fits the following vehicles
- Passat 2.0 TDI 110 B6 (2005-2011) 10/08-03/11
| Description | Clutch Kit |
|---|---|
| OE System | CBDC |
| Fitment | 110 |
| Part Detail | For flywheel manufacturerLUK |
| Size mm | With clutch pressure plate, With clutch plate,with releaser |
| Country | Friction Lining Outer Dia.:228 |
| Trade No | 28 |
| Axle Info | For Eng. with dual-mass flywheel |
| PR/RP No | Manual Transmission |
Always replace the complete clutch assembly.
Check against the original units before fitting.
Make sure the friction plate is fitted the correct way round.
Never allow the gearbox to hang on clutch components.
£126.20
£105.17
new
Einbach Clutch Kit (Service Kit)
2E61108
In Stock
Always replace the complete clutch assembly.
Check against the original units before fitting.
Make sure the friction plate is fitted the correct way round.
Never allow the gearbox to hang on clutch components.
This Einbach Clutch Kit (Service Kit) fits the following vehicles
- Passat 2.0 TDI 140 DPF B6 (2005-2011) 08/06-03/11
| Description | Clutch Kit |
|---|---|
| OE System | BMP |
| Fitment | 138 |
| Size mm | with clutch pressure plate, with clutch plate, without central slave cylinder |
| Country | Friction Lining Outer Dia.:240 |
| Trade No | 23 |
| Axle Info | For Eng. with retrofitted single-mass flywheel |
| PR/RP No | Manual Transmission |
| Engine Code | BMP |
Always replace the complete clutch assembly.
Check against the original units before fitting.
Make sure the friction plate is fitted the correct way round.
Never allow the gearbox to hang on clutch components.
£151.88
£126.57
new
Out of Stock
Always replace the complete clutch assembly.
Check against the original units before fitting.
Make sure the friction plate is fitted the correct way round.
Never allow the gearbox to hang on clutch components.
This Einbach Clutch Kit (Conversion Kit) fits the following vehicles
- Passat 2.0 TDI 110 B6 (2005-2011) 10/08-03/11
| Description | Clutch Kit (SMF Conv.) |
|---|---|
| OE System | CBDC |
| Fitment | 110 |
| Size mm | with clutch pressure plate, with clutch plate, with flywheel, with releaser |
| Country | Friction Lining Outer Dia.:228 |
| Trade No | 28 |
| Axle Info | Conv. from dual-mass flywheel to single-mass flywheel;For veh. with start-stop function |
| PR/RP No | Manual Transmission |
Always replace the complete clutch assembly.
Check against the original units before fitting.
Make sure the friction plate is fitted the correct way round.
Never allow the gearbox to hang on clutch components.
£300.64
£250.53
new
LUK Clutch Kit
624318009
Out of Stock
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
This LUK Clutch Kit fits the following vehicles
- Passat 2.0 TDI 140 B6 (2005-2011) 06/05-03/11
- Passat 2.0 TDI 140 B6 (2005-2011) 11/05-03/11
- Passat 2.0 TDI 140 B7 (2010-2015) 11/10-05/11
- Passat 2.0 TDI 140 B7 (2010-2015) 11/10-07/15
- Passat 2.0 TDI 140 DPF B6 (2005-2011) 08/06-03/11
- Passat 2.0 TDI 170 B6 (2005-2011) 10/05-03/11
- Passat 2.0 TDI 170 B6 (2005-2011) 11/05-03/11
- Passat CC 2.0 TDI 140 (2008-2012) 05/08-05/11
- Passat CC 2.0 TDI 140 (2008-2012) 05/08-05/12
- Passat CC 2.0 TDI 170 (2008-2012) 06/10-05/11
- Passat CC 2.0 TDI 170 (2008-2012) 09/08-05/11
| Description | Clutch Kit |
|---|---|
| Engine Code | BKP, CBAB, BMA, CBAA |
| BHP | 136 |
| Brand Type | LuK SAC |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment |
| OE System | for flywheel manufacturer: LuK |
| Size mm | Dia: 240 |
| Description | Clutch Kit |
|---|---|
| Engine Code | BKP, BMA, CBAA, CBAB |
| BHP | 136 |
| Brand Type | LuK SAC |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment |
| OE System | for flywheel manufacturer: LuK |
| Size mm | Dia: 240 |
| Description | Clutch Kit |
|---|---|
| Engine Code | CFFB |
| BHP | 138 |
| Brand Type | LuK SAC |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment |
| OE System | for flywheel manufacturer: LuK |
| Size mm | Dia: 240 |
| Description | Clutch Kit |
|---|---|
| Engine Code | CBAC |
| BHP | 138 |
| Brand Type | LuK SAC |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment |
| OE System | for flywheel manufacturer: LuK |
| Size mm | Dia: 240 |
| Description | Clutch Kit |
|---|---|
| Engine Code | BMP |
| BHP | 138 |
| Brand Type | LuK SAC |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment |
| OE System | for flywheel manufacturer: LuK |
| Size mm | Dia: 240 |
| Description | Clutch Kit |
|---|---|
| Engine Code | BMR, CBBB |
| BHP | 168 |
| Brand Type | LuK SAC |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment |
| OE System | for flywheel manufacturer: LuK |
| Size mm | Dia: 240 |
| Description | Clutch Kit |
|---|---|
| Engine Code | BMR, CBBB |
| BHP | 168 |
| Brand Type | LuK SAC |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment |
| OE System | for flywheel manufacturer: LuK |
| Size mm | Dia: 240 |
| Description | Clutch Kit |
|---|---|
| Engine Code | CFFB, CBAB |
| BHP | 136 |
| Brand Type | LuK SAC |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment |
| OE System | for flywheel manufacturer: LuK |
| Size mm | Dia: 240 |
| Description | Clutch Kit |
|---|---|
| Engine Code | CBAA |
| BHP | 136 |
| Brand Type | LuK SAC |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment |
| OE System | for flywheel manufacturer: LuK |
| Size mm | Dia: 240 |
| Description | Clutch Kit |
|---|---|
| Engine Code | CFGB |
| BHP | 168 |
| Brand Type | LuK SAC |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment |
| Size mm | Dia: 240 |
| Description | Clutch Kit |
|---|---|
| Engine Code | CBBB |
| BHP | 168 |
| Brand Type | LuK SAC |
| Engine Detail | for engines with dual-mass flywheel |
| Note | with Clutch Disc; Check and replace dual-mass flywheel if necessary.; Requires special tools for mounting |
| Note 2 | with clutch pressure plate; with automatic adjustment |
| Size mm | Dia: 240 |
As one of the world s leading suppliers of clutches, Dual-Mass Flywheels, Power-Steering Pumps, Self Adjusting Clutch and engine components LuK products guarantee the highest quality and reliability.
£168.22
£140.18
new